* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Livrare standard gratuită pentru comenzi peste $9.9
Politică de returnare
Articolele returnate vor fi acceptate în termen de 40 de zile de la data primirii mărfurilor. Articolele personalizate nu pot fi returnate sau schimbate. Articolele cumpărate cu un card cadou electronic pot fi schimbate doar; rambursările nu se aplică.
Cadou gratuit
Bine ați venit la Roymall, site-ul dumneavoastră profesional pentru achiziționarea de cadouri premium de la magazinele universale. Apreciem și valorizăm sprijinul dumneavoastră și dorim să vă exprimăm recunoștința prin adăugarea unui plus de entuziasm la achizițiile dumneavoastră. Când cumpărați de la noi, nu numai că vă bucurați de produse de înaltă calitate care vă îmbunătățesc stilul de viață, dar veți primi și un cadou gratuit exclusiv cu fiecare comandă pe care o plasați. Sunteți gata să explorați colecția noastră și să găsiți cadourile perfecte pentru dumneavoastră? Răsfoiți selecția noastră de articole premium de la magazinele universale, plasați comanda și așteptați cu nerăbdare entuziasmul primirii cadoului gratuit împreună cu achiziția dumneavoastră.
Politica de livrare
Vom depune eforturi pentru a vă livra articolele după primirea comenzilor dumneavoastră și pentru a ne asigura că acestea ajung în siguranță. Detaliile de livrare vor fi furnizate în e-mailul de confirmare.În majoritatea cazurilor, comenzile sunt procesate în termen de 2 zile.În circumstanțe speciale, acestea vor fi amânate după cum urmează: Când plasați o comandă sâmbătă, duminică sau în zilele de sărbătoare, aceasta va fi amânată cu 2 zile..În mod normal, sunt necesare 5-7 zile lucrătoare (de luni până vineri) fără a fi afectate de întârzieri de zbor sau alți factori de mediu..Deoarece serviciul nostru de livrare este la nivel mondial, timpii de livrare vor depinde de locația dumneavoastră, așa că poate dura ceva timp și vă rugăm să aveți răbdare dacă vă aflați în zone îndepărtate sau țări.
1. Politica de returnare & schimb
Acceptăm doar articole achiziționate de pe roymall.com. Dacă achiziționați de la distribuitorii noștri locali sau de la alți comercianți, nu le puteți returna la noi.Articolele de vânzare finală sau cadourile gratuite nu sunt acceptate pentru returnare.Pentru a fi eligibil pentru returnare, articolul dumneavoastră trebuie să fie nefolosit și în aceeași stare în care l-ați primit. De asemenea, trebuie să fie în ambalajul original.După primirea instrucțiunilor de returnare de la noi, vă rugăm să ambalați articolele returnate și să lăsați pachetul la oficiul poștal local sau la alt curier. Vom procesa articolul returnat sau schimbat în termen de 3-5 zile lucrătoare după ce îl primim. Rambursarea va fi procesată și creditată automat către metoda originală de plată.Nu se pot accepta returnări sau schimburi dacă produsul a fost produs la comandă, inclusiv dimensiuni personalizate, culoare personalizată sau imprimare personalizată.Ai nevoie de mai mult ajutor, te rugăm să ne contactezi. service@roymall.com sau Whatsapp: +8619359849471
2.Politica de rambursare
Veți primi o rambursare completă sau un credit de magazin de 100% după ce primim pachetul returnat și îl verificăm. Rambursarea va fi procesată și creditată automat către metoda originală de plată.Vă rugăm să rețineți că costurile de expediere și orice taxe sau taxe nu sunt rambursabile. Costurile suplimentare de expediere nu sunt rambursabile odată ce pachetul a fost expediat. Sunteți responsabil pentru plata acestor taxe și nu putem renunța la ele sau le rambursăm, chiar dacă comanda este returnată către noi.După ce am primit și am confirmat articolul returnat, vă vom trimite un e-mail pentru a vă anunța că am primit articolul returnat. De asemenea, vă vom anunța despre aprobarea sau respingerea rambursării dumneavoastră.Dacă aveți probleme legate de procesul de rambursare, vă rugăm să ne contactați. service@roymall.com sau Whatsapp: +8619359849471
Note: Raspberrry Pi is not included. Introduction:
This is the dual use ABS case for 3.5 inch screen kit, suitable for Raspberry Pi 4 Model B.It is esay to install the case with screen and Raspberry Pi.When you use the Raspberry Pi with 3.5inch screen,please remove the cover of case;When you use Raspberry Pi with cooling fan,you needn"t remover the cover of case.
Note:The 3.5inch screen and cooling fan can"t be used at the same time. If Raspberry Pi is equipped with GPIO display drivers,the HDMI port will have no signal output
Specifications:
Colour: Black
Material: ABS plastic
Size: 90*61*35
Applicable to: Raspberry Pi 4B
3.5-inch touch screen or fan that can install Raspberry Pi
Knowing that: 3.5-inch display and fan cannot be installed at the same time due to the PIN pin
3.5inch Touch Screen Features:
1. Physical resolution 320 x 480, with resistive touch control
2. With the refresh rate of raspberry pi around 50Hz, play video to play the game without pressure.
3. With the refresh rate of raspberry pie around 50Hz, play video to play the game without pressure
4. Support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom
5. Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+ , 4B)
6. Support Raspbian/Ubuntu/Kali system, provide driver and image
7. WIKI for reference: raspberrypiwiki.com/index.php/3.5_inch_LCD_B
Note:
Please plug the screen on Raspberry Pi"s GPIO pins correctly( as the picture) , otherwise the touch function will be damaged.
If Raspberry Pi is equipped with GPIO display drivers such as MPI2411, MPI2418, MPI2801, MPI3201, MPI3501, etc., the HDMI port will have no signal output
If you need to switch back to the HDMI display mode, execute:
This LCD can be calibrated using a program called xinput_calibrator
Install it with the commands:
cd LCD-show/sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
Click the Men button on the task bar, choose Preference -> Calibrate Touchscreen.
Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.
You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).
/ect/X11/xorg.conf.d/99-calibration.conf
Save the touch parameters
About Dual Use ABS Case:
1. The Case made of ABS material,support to install 3.5 inch touch screen,and need to remove the cover of case. When you don"t use the 3.5 inch touchscreen , it is a general case with cooling fan.The 3.5inch screen and cooling fan can"t be used at the same time.
2. The case is design for Raspberry Pi 4 Model B , remain almost all interface such as USB , Ethernet , A/V , micro HDMI , SD card slot , display , camera( CSI). (Note: A1 case remain GPIO and POE hole , but A2 case does not remian)
3. Make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.
Package Included: 1 x ABS box case 1 x touch screen 1 x touch screen pen
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-8 of 8|
Show Original
A part of the QA has been auto-translated.
0
Q:
Does this just work after assembling or do you have to use your own chip or soemthing?
Does this just work after assembling or do you have to use your own chip or soemthing?
The last command to type in is ' sudo .LCD35-show ' (with a slash between the dot and the LCD, but BG doesn't let me write it) instead of the one provided
The last command to type in is ' sudo .LCD35-show ' (with a slash between the dot and the LCD, but BG doesn't let me write it) instead of the one provided
Answered by Gwenaël on 17/06/2020Helpful (0)
0
Q:
How to install driver on Raspberry Pi 4b for this display?
How to install driver on Raspberry Pi 4b for this display?
This does not work if you follow the product description... There is a comment where somebody said a waveshare link, the display started to work me, but the quality is wrong, there is less color, you cannot see whats on the screen, and I cannot calibrate the touchscreen to work. (I have an other LCD similar to this, but that was working better.
Its far from 50fps with the waveshare driver. Do anybody knows a better driver? Or it is bad quality?
This does not work if you follow the product description... There is a comment where somebody said a waveshare link, the display started to work me, but the quality is wrong, there is less color, you cannot see whats on the screen, and I cannot calibrate the touchscreen to work. (I have an other LCD similar to this, but that was working better.
Its far from 50fps with the waveshare driver. Do anybody knows a better driver? Or it is bad quality?
Answered by hygyke on 16/09/2020Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.