EdenFantasys Newsletter Subscription Form
Take 20% off your order now - Get early access to deals and sales
Home>mall>Toys Hobbies & Robot
0Apreciat

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

4.163
L487.08 / L594.28
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

L299.67 / L594.28
Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

Checkout securizat garantat

Cadou gratuit
Cadou gratuit cu orice achiziție
Politică de livrare
Livrare standard gratuită pentru comenzi peste $9.9
Politică de returnare
Articolele returnate vor fi acceptate în termen de 40 de zile de la data primirii mărfurilor. Articolele personalizate nu pot fi returnate sau schimbate. Articolele cumpărate cu un card cadou electronic pot fi schimbate doar; rambursările nu se aplică.

Cadou gratuit

Bine ați venit la Roymall, site-ul dumneavoastră profesional pentru achiziționarea de cadouri premium de la magazinele universale. Apreciem și valorizăm sprijinul dumneavoastră și dorim să vă exprimăm recunoștința prin adăugarea unui plus de entuziasm la achizițiile dumneavoastră. Când cumpărați de la noi, nu numai că vă bucurați de produse de înaltă calitate care vă îmbunătățesc stilul de viață, dar veți primi și un cadou gratuit exclusiv cu fiecare comandă pe care o plasați. Sunteți gata să explorați colecția noastră și să găsiți cadourile perfecte pentru dumneavoastră? Răsfoiți selecția noastră de articole premium de la magazinele universale, plasați comanda și așteptați cu nerăbdare entuziasmul primirii cadoului gratuit împreună cu achiziția dumneavoastră.

Politica de livrare

Vom depune eforturi pentru a vă livra articolele după primirea comenzilor dumneavoastră și pentru a ne asigura că acestea ajung în siguranță. Detaliile de livrare vor fi furnizate în e-mailul de confirmare.În majoritatea cazurilor, comenzile sunt procesate în termen de 2 zile.În circumstanțe speciale, acestea vor fi amânate după cum urmează: Când plasați o comandă sâmbătă, duminică sau în zilele de sărbătoare, aceasta va fi amânată cu 2 zile..În mod normal, sunt necesare 5-7 zile lucrătoare (de luni până vineri) fără a fi afectate de întârzieri de zbor sau alți factori de mediu..Deoarece serviciul nostru de livrare este la nivel mondial, timpii de livrare vor depinde de locația dumneavoastră, așa că poate dura ceva timp și vă rugăm să aveți răbdare dacă vă aflați în zone îndepărtate sau țări.

1. Politica de returnare & schimb

Acceptăm doar articole achiziționate de pe roymall.com. Dacă achiziționați de la distribuitorii noștri locali sau de la alți comercianți, nu le puteți returna la noi. Articolele de vânzare finală sau cadourile gratuite nu sunt acceptate pentru returnare. Pentru a fi eligibil pentru returnare, articolul dumneavoastră trebuie să fie nefolosit și în aceeași stare în care l-ați primit. De asemenea, trebuie să fie în ambalajul original.După primirea instrucțiunilor de returnare de la noi, vă rugăm să ambalați articolele returnate și să lăsați pachetul la oficiul poștal local sau la alt curier.
Vom procesa articolul returnat sau schimbat în termen de 3-5 zile lucrătoare după ce îl primim. Rambursarea va fi procesată și creditată automat către metoda originală de plată.Nu se pot accepta returnări sau schimburi dacă produsul a fost produs la comandă, inclusiv dimensiuni personalizate, culoare personalizată sau imprimare personalizată.Ai nevoie de mai mult ajutor, te rugăm să ne contactezi. service@roymall.com sau Whatsapp: +447549870296

2.Politica de rambursare

Veți primi o rambursare completă sau un credit de magazin de 100% după ce primim pachetul returnat și îl verificăm. Rambursarea va fi procesată și creditată automat către metoda originală de plată. Vă rugăm să rețineți că costurile de expediere și orice taxe sau taxe nu sunt rambursabile. Costurile suplimentare de expediere nu sunt rambursabile odată ce pachetul a fost expediat. Sunteți responsabil pentru plata acestor taxe și nu putem renunța la ele sau le rambursăm, chiar dacă comanda este returnată către noi.După ce am primit și am confirmat articolul returnat, vă vom trimite un e-mail pentru a vă anunța că am primit articolul returnat. De asemenea, vă vom anunța despre aprobarea sau respingerea rambursării dumneavoastră.Dacă aveți probleme legate de procesul de rambursare, vă rugăm să ne contactați. service@roymall.com sau Whatsapp: +447549870296
DECLARATION
This is Electronic Speed Controller (ESC) for Crawler Brushed. High power system for RC model is not good, so please read this manual carefully. Since we can't control over the correct use, installation, application, or maintenance of our products, we've no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure of malfunctioning etc. will be denied. We assume no liability for personal injury, consequential damages resulting from our product or our workmanship.

FEATURES
1. Specially designed for RC Crawler Brushed car with excellent throttle linearity and driving feel.
2. Compatible with brush motor.
3. The strong resistant current capability, excellent heat dissipation.
4. Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection /
5. Easily programmed and compatible with pocket-sized program card.

Specifications
1. Cont. Current/ Burst Current:60A/320A.
2. Resistance:0.0014ohm
3. Motor Type: brush motor.
4. Suitable Car:1/10 Crawler Brushed.
5. Battery:2~3 cells Lipo,4~9 cells NiMH.
6. BEC:6V/2A (switch mode).
7. Dimension:32mm*37mm*18mm

Instuctions
1. Connect BEC wires with the receiver
2. Connect motor wires with ESC
3. Turn on the transmitter
4. Connect battery pack with ESC then switch on the ESC.
5. When the connection of motor and battery is finished, the motor emits u201cBeepinchs tone.
6. When the throttle stick is in the neutral position, the motor re-emits u201cBeepinchs tone.
7. The ESC is workable.

Troubleshooting
1. If after power on, motor can't work, no sound is emitted, please check the connections between battery pack and motor.
2. If the motor emits a u201cBeepinchs tone Only, please check all the connections: BEC wires, transmitter and receiver, throttle signal wires, etc. please check the transmitter TH.TRIM and adjust it to the motor re-emits u201cBeepinchs tone.
3. If the car can't be speed up, please check either voltage of the battery pack is too low or the temperature of ESC is too high. If the voltage of the battery pack is too low, please replace the battery pack. If the temperature of ESC is too high, please check all connections. If not, please push the button EPA on your remote control.
4. If the car stops suddenly while in working state, please check the motor's connections, and the
barrier.
5. If the car runs in the opposite direction, which the transmitter is available, please swap two wire connections between the ESC and the motor.

Set the ESC
ESC uses the jumper cap to set battery type.

Programme card Appearance description:see more details in the picture
1:Initial Start Force:5%,13%.21%.32% (default value 5%)
2:Low Voltage Cut-Off: The function is mainly to prevent the lithium battery pack from over discharging. When using lithium battery pack, please set the suitable v alue for low-voltage protection as your like. WARNING: Never use the default value u201cNon-protectioninchs for lithium battery! 3.1V,3.3V,2.9V
(default value 3.1V)
3:Drag Brake Force: 100%,90%,80%,70%(default value 100%)
Max Reverse Force: 95%,75%,50%(default value 95%)
5:3 Start Modes (Also called u201cPunchinchs) from u201csoftinchs to u201cvery aggressiveinchs (default value Medium)

Programme card way:
1.Connect BEC wires with the program car then turn on the ESC.
2.The Green LED flashes for 2 times then LED off, that is, the connecting program car with ESC is successful, and the Red LED on presents the current value of that item. Otherwise, the connecting is failed.
3.Please press the Key u201cu2193inchs to select different programs
4.Please press the Key u201cu2192inchs to select different value of the current program
5.Please press the Key u201cPrograminchs to confirm above selections, the Green LED on immediately and has gone out within 5 seconds, that is, this process is successful.
6.Please press the Key u201cResetinchs to reset the factory setting.

Package list:

1x program card

Toys Hobbies & Robot Ranking

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Surpass Hobby LED Program Card For 1/10 Crawler Brushed ESC With BEC 6V/2A

Customer Reviews

5.00 out of 5
See all 138 reviews
Write a Review
  • All Reviews (138)
  • Image ( 2 )
  • Video (0)
  • All Star
    • All Star(138)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 26/09/2020

    Works with Surpass Rocket 18A for 1410 motor as well but need to get the menu from the manual, the menu written on this is not for 18A.

    Comments (0)
    Show Original
  • 24/07/2019

    Fast delivery, well packed, looking good so far. Still waiting for the ESC to test.

    Comments (0)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-9 of 9 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: does this work with brushless motor and ESC.from surpass?
      A:
      I'm really worried then I did not know
      Answered by BG555155413 on 28/04/2021Helpful (0)
    • 0
      Q: works with any esc??
      A:
      No only for surpass hobby
      Answered by RCdude on 22/11/2022Helpful (0)
    • 0
      Q: do you have to buy this item to use your esc for the first time. or can I still use the esc and customize the settings later. many thanks
      A:
      it's for wltoys 124017 cogging
      Answered by Olivvtc on 05/11/2022Helpful (0)
    • 0
      Q: Is it suitable for any brushed ESC 60A system?
      A:
      No,only for surpass hobby.
      Answered by The seller on 11/07/2024Helpful (0)
    • 0
      Q: Will this work with the ESC from a ZD Racing DBX-07
      A:
      No,only for surpass hobby.
      Answered by The seller on 06/12/2022Helpful (0)
    • 0
      Q: Work for surpass f540 v2?
      A:
      not sure
      Answered by ITALIANSTALLION702 on 29/03/2023Helpful (0)
    • 0
      Q: does it work for esc 150a surpass hobby?
      A:
      yes it does , the gray card as well too
      Answered by BG504210151 on 17/10/2021Helpful (0)
    • 0
      Q: this work for racestar
      A:
      yes
      Answered by Grommet on 05/06/2021Helpful (0)
    • 0
      Q: does this work with brushless esc from Hobby Queen
      A:
      yes
      Answered by BG421442383 on 22/03/2021Helpful (0)

    Coșul meu Coș (140)
    Favoritele mele Favoritele mele (0)

    Roymall Service